Sorry, misread your question. The v1 chassis nor power modules should not be a problem, but it could be an issue with the old fans. Do not find any good information regarding the fans, but try to reach out to your account team and they will help you out.
And you need to run XR 6.2.1 or later. /Ted -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Ted Pelas Johansson Sent: den 21 november 2017 10:43 To: Dmitry Kiselev <[email protected]>; [email protected] Subject: Re: [c-nsp] ASR9000 HW compatibility [This sender failed our fraud detection checks and may not be who they appear to be. Learn about spoofing at http://aka.ms/LearnAboutSpoofing] https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/datasheet-c78-738704.html /Ted -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Dmitry Kiselev Sent: den 21 november 2017 09:33 To: [email protected] Subject: [c-nsp] ASR9000 HW compatibility Hi! Could any on the list advice me are new 48-ports 10G line cards (A9K-48x10GE) can run inside old ASR9010 v01 chassis with old v01 power modules and fans? Assuming power budget is enough and XR has already updated. I've already checked cisco and live! sites but found no any hints. :( Thanks in advance -- Dmitry Kiselev _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ******** IMPORTANT NOTICE ******** The content of this e-mail is intended for the addressee(s) only and may contain information that is confidential and/or otherwise protected from disclosure. If you are not the intended recipient, please note that any copying, distribution or any other use or dissemination of the information contained in this e-mail (and its attachments) is strictly prohibited. If you have received this e-mail in error, kindly notify the sender immediately by replying to this e-mail and delete the e-mail and any copies thereof. Tele2 AB (publ) and its subsidiaries (“Tele2 Group”) accepts no responsibility for the consequences of any viruses, corruption or other interference transmitted by e-mail. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ******** IMPORTANT NOTICE ******** The content of this e-mail is intended for the addressee(s) only and may contain information that is confidential and/or otherwise protected from disclosure. If you are not the intended recipient, please note that any copying, distribution or any other use or dissemination of the information contained in this e-mail (and its attachments) is strictly prohibited. If you have received this e-mail in error, kindly notify the sender immediately by replying to this e-mail and delete the e-mail and any copies thereof. Tele2 AB (publ) and its subsidiaries (“Tele2 Group”) accepts no responsibility for the consequences of any viruses, corruption or other interference transmitted by e-mail. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
