You should read this: https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html#anc13. Once the switch is fully compatible with the stack and joined, you should be able to copy the image over, but I feel this likely does not meet your need. The provided link should be helpful.
- Nathan On Thu, Sep 13, 2018 at 7:48 AM Harry Hambi - Atos <harry.ha...@bbc.co.uk> wrote: > Hi List, > If I introduce a new member switch to a stack, switch it on, can I then > copy an IOS image from an existing members flash to the new stack member? > Any information appreciated. > > Harry Hambi BEng(Hons) MIET Rsgb > > > > > ---------------------------- > > http://www.bbc.co.uk > This e-mail (and any attachments) is confidential and may contain personal > views which are not the views of the BBC unless specifically stated. > If you have received it in error, please delete it from your system. > Do not use, copy or disclose the information in any way nor act in > reliance on it and notify the sender immediately. > Please note that the BBC monitors e-mails sent or received. > Further communication will signify your consent to this. > > --------------------- > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/