> > > Is this the norm for the Cisco 10/25 switches as well? I don't have any to > test with at the moment. > > Cisco 3850's have some 1/10 uplink module ports that are identified as Gigabit or TenGigabit based on the configuration. However, both types of interfaces always exist logically, they just don't get used until you configure/use the physical port one way or the other. On the other hand, I have played with a number of 1/10/25 and 40/100 interfaces on the Nexus line and the name and internal references remain the same regardless of the configured use.
_Nathan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
