Hi Mike,
Would this work for you?
bridge-domain X
interface A
service instance 1 ethernet
encapsulation dot1q 131
rewrite ingress tag pop 1 symmetric
bridge-domain X
interface B
service instance 1 ethernet
encapsulation dot1q 313 second-dot1q 10
rewrite ingress tag pop 2 symmetric
bridge-domain X
Hope this helps.
Regards,
ShaoYi Tan
On 21/4/20, 3:51 AM, "cisco-nsp on behalf of Mike"
<cisco-nsp-boun...@puck.nether.net on behalf of mike+li...@yourtownonline.com>
wrote:
Hello,
I have an ASR920 and I am trying to translate input dog1q tag
'131' to dual-tagged '313,10'. My intention is to the bridge this over
to another port that expects these frames on 313,10. But when I try
configuring the translation, I get the following:
Router(config)#interface gi0/0/0
Router(config-if)#service instance 1 ethernet
Router(config-if-srv)#encapsulation dot1q 131
Router(config-if-srv)#rewrite ingress tag translate 1-to-2 dot1q 313
second-dot1q 10 symmetric
1_TO_2 not supported on EFP
This rewrite ingress on ServInst 1(Gi0/0/0) is not allowed by platform
or other components.
Can anyone tell me how to get this done or is this just not possible
on asr920?
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
