Yep - that absolutely works, thank you!
On 4/20/20 6:29 PM, Tan Shao Yi wrote: > Hi Mike, > > Would this work for you? > > bridge-domain X > > interface A > service instance 1 ethernet > encapsulation dot1q 131 > rewrite ingress tag pop 1 symmetric > bridge-domain X > > interface B > service instance 1 ethernet > encapsulation dot1q 313 second-dot1q 10 > rewrite ingress tag pop 2 symmetric > bridge-domain X > > Hope this helps. > > Regards, > ShaoYi Tan > > On 21/4/20, 3:51 AM, "cisco-nsp on behalf of Mike" > <[email protected] on behalf of > [email protected]> wrote: > > Hello, > > I have an ASR920 and I am trying to translate input dog1q tag > '131' to dual-tagged '313,10'. My intention is to the bridge this over > to another port that expects these frames on 313,10. But when I try > configuring the translation, I get the following: > > Router(config)#interface gi0/0/0 > Router(config-if)#service instance 1 ethernet > Router(config-if-srv)#encapsulation dot1q 131 > Router(config-if-srv)#rewrite ingress tag translate 1-to-2 dot1q 313 > second-dot1q 10 symmetric > 1_TO_2 not supported on EFP > This rewrite ingress on ServInst 1(Gi0/0/0) is not allowed by platform > or other components. > > > Can anyone tell me how to get this done or is this just not possible > on asr920? > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
