On 09.02.2021 17:15, Jeremy Bresley wrote:
From the release notes for 8.10, the 700s and 1700s should work as
subordinate APs, the 1600s are not supported in anything past 8.5.
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/release_notes/b_ME_RN_810.html
Ah, thanks! Didn't find the image names for the 1700/700 series APs
anywhere, so I assumed they too weren't supported anymore.
The older model controllers (2504/5508/7510) aren't supported on
anything past 8.5, and won't support any APs newer than the
1800/2800/3800 series. Also be aware that the 2504s LDoS date is
April 30, 2023, so it's only got about 2 years left of any support at
all.
Yes, also the customer's WLC isn't very new, so replacing it with a
complete ME-setup might be advisable. The requirements for the setup are
rather low, so this solution would be well sufficient. Only having to
replace the 1600 APs would make the choice easier of course ...
Thanks for the info ...
-garry
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
