Send cisco-voip mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. 9.1.2 Release (Salisbury, Charles)
2. Re: CUCM 9 incoming SIP trunk to queue: early media problem
(Cheng, Karen)
3. Re: Deploying Cisco IP Communicator using freeformdevicename
(Wes Sisk)
4. Can't Configure CAD Client... (Jonathan Charles)
5. Re: CUCM 9 incoming SIP trunk to queue: early media problem
(Adam Frankel)
6. Re: Can't Configure CAD Client... (Kevin Damisch)
7. Re: Can't Configure CAD Client... (Jonathan Charles)
----------------------------------------------------------------------
Message: 1
Date: Sun, 30 Jun 2013 16:24:25 +0000
From: "Salisbury, Charles" <[email protected]>
To: "[email protected]" <[email protected]>
Subject: [cisco-voip] 9.1.2 Release
Message-ID:
<9f07c1969322db428f43055d7eb33b15794a3...@zvm203-maildb1.gentex.com>
Content-Type: text/plain; charset="utf-8"
Any idea on when 9.1.2 will be released for download?
-CS
THE INFORMATION CONTAINED IN THIS E-MAIL MESSAGE AND ANY ATTACHMENTS SENT FROM
GENTEX CORPORATION IS GENTEX CONFIDENTIAL INFORMATION INTENDED ONLY FOR THE
PERSONAL USE OF THE INDIVIDUAL OR ENTITY NAMED ABOVE. If you are not the
intended recipient, you are hereby notified that any review, distribution, or
copying of this communication is strictly prohibited. If you have received this
communication in error, please immediately notify the sender by return e-mail,
and delete this e-mail message and any attachments from your computer.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130630/1d27e384/attachment-0001.html>
------------------------------
Message: 2
Date: Mon, 1 Jul 2013 08:29:24 +1000
From: "Cheng, Karen" <[email protected]>
To: "'Ryan Ratliff'" <[email protected]>, Carlos G Mendioroz
<[email protected]>
Cc: cisco-voip <[email protected]>
Subject: Re: [cisco-voip] CUCM 9 incoming SIP trunk to queue: early
media problem
Message-ID:
<[email protected]>
Content-Type: text/plain; charset="us-ascii"
I thought you could tick the Disable Early Media on 180 under the SIP Profile
attached to the SIP Trunk in CUCM.
Karen Cheng
Voice Engineer
From: cisco-voip [mailto:[email protected]] On Behalf Of Ryan
Ratliff
Sent: Friday, 28 June 2013 8:47 PM
To: Carlos G Mendioroz
Cc: cisco-voip
Subject: Re: [cisco-voip] CUCM 9 incoming SIP trunk to queue: early media
problem
Not for the early announcement feature for hunt pilots, no.
-Ryan
On Jun 27, 2013, at 6:31 PM, Carlos G Mendioroz
<[email protected]<mailto:[email protected]>> wrote:
Hi,
I'm playing with using the "new" queue feature to do a simple welcome
message before attendant. Works a treat for inside calls, but CUCM is
doing early media (183 progress with SDP) for the message and my ITSP is
not cutting the audio through :(
I've found no way to tell CUCM to accept the call right away. Is there any ?
TIA,
--
Carlos G Mendioroz <[email protected]<mailto:[email protected]>> LW7 EQI
Argentina
_______________________________________________
cisco-voip mailing list
[email protected]<mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________
This communication has been sent on behalf of RACQ Insurance Limited [RACQI].
The information contained in this communication may be privileged and
confidential. If you are not the intended recipient, any use, disclosure or
copying of this communication is expressly prohibited.
If you have received this communication in error, please delete it immediately.
RACQI and its associated entities do not warrant or represent that this
communication [including any enclosed files] is free from electronic viruses,
faults or defects.
ReMEMBER to save 15% when you pre-purchase your Ekka tickets through RACQ until
16 June 2013
Please Note: If you are not the intended recipient, please delete this email as
its use is prohibited. RACQ does not warrant or represent that this email is
free from viruses or defects. If you do not wish to receive any further
commercial electronic messages from RACQ please e-mail [email protected]
or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130701/820e116c/attachment-0001.html>
------------------------------
Message: 3
Date: Mon, 1 Jul 2013 09:35:13 -0400
From: Wes Sisk <[email protected]>
To: Jonathan Charles <[email protected]>
Cc: "[email protected] VOIP" <[email protected]>
Subject: Re: [cisco-voip] Deploying Cisco IP Communicator using
freeformdevicename
Message-ID: <[email protected]>
Content-Type: text/plain; charset=iso-8859-1
I think Peter Slow just went through something similar.
Generally the process would be to invoke the MSI and use environment variables
to retrieve the username:
from command prompt:
C:\Users\wsisk>set | findstr USER
ALLUSERSPROFILE=C:\ProgramData
USERDNSDOMAIN=CISCO.COM
USERDOMAIN=CISCO
USERNAME=wsisk
USERPROFILE=C:\Users\wsisk
C:\Users\wsisk>echo %USERNAME%
wsisk
This may vary some depending on how you invoke the MSI. When I was doing
desktop software management with SMS long ago it included special variables,
sometimes with different names, for accessing local environment information.
HTH,
Wes
On Jun 27, 2013, at 11:30 AM, Jonathan Charles <[email protected]> wrote:
We are deploying Cisco IP Communicator 8.6.3 to about a 1000 uses using their
AD user ID as the freeformdevicename for the device name.
How can we deploy this, using the msi, automatically and set it based on logged
in userID?
The deployment guide is remarkably spartan on deployment options.
Any ideas?
Jonathan
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
Message: 4
Date: Mon, 1 Jul 2013 09:10:00 -0500
From: Jonathan Charles <[email protected]>
To: "[email protected]" <[email protected]>
Subject: [cisco-voip] Can't Configure CAD Client...
Message-ID:
<CAPLPVZjnnRcPVAPHmDGmP1C5G6PgJRTekZfkjkzR4EJRg=4...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
can't run client config tool (9.0.2), I get the following error while it is
trying to upload the file:
LmMsiCfg
Error opening DB: error = d<110>
Any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130701/3d1ff049/attachment-0001.html>
------------------------------
Message: 5
Date: Mon, 01 Jul 2013 10:11:01 -0400
From: Adam Frankel <[email protected]>
To: Carlos G Mendioroz <[email protected]>
Cc: cisco-voip <[email protected]>
Subject: Re: [cisco-voip] CUCM 9 incoming SIP trunk to queue: early
media problem
Message-ID: <[email protected]>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
You must enable PRACK on a SIP Trunk for call queuing announcement to
work properly. You can do this by modifying the Rel1XX setting on the
SIP Profile.
There is also an enhancement to track this feature - CSCuh15872.
HTH.
Adam
------------------------------------------------------------------------
*From:* Carlos G Mendioroz <[email protected]>
*Sent:* Thu, Jun 27, 2013 6:31:13 PM
*To:* cisco-voip <[email protected]>
*CC:*
*Subject:* [cisco-voip] CUCM 9 incoming SIP trunk to queue: early media
problem
> Hi,
> I'm playing with using the "new" queue feature to do a simple welcome
> message before attendant. Works a treat for inside calls, but CUCM is
> doing early media (183 progress with SDP) for the message and my ITSP is
> not cutting the audio through :(
>
> I've found no way to tell CUCM to accept the call right away. Is there any ?
>
> TIA,
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130701/4b988653/attachment-0001.html>
------------------------------
Message: 6
Date: Mon, 1 Jul 2013 14:57:23 +0000
From: Kevin Damisch <[email protected]>
To: Jonathan Charles <[email protected]>, "[email protected]"
<[email protected]>
Subject: Re: [cisco-voip] Can't Configure CAD Client...
Message-ID:
<c13eeed540960e4f802d191fc008b3e22b881...@vssdsmexch01.vitalsite.com>
Content-Type: text/plain; charset="us-ascii"
Only way I could get past that was to run it on a Windows XP machine. No
matter what compatibility mode we chose in Windows 7, we always got that error.
Kevin Damisch
Vital Support Systems
From: cisco-voip [mailto:[email protected]] On Behalf Of
Jonathan Charles
Sent: Monday, July 01, 2013 9:10 AM
To: [email protected]
Subject: [cisco-voip] Can't Configure CAD Client...
can't run client config tool (9.0.2), I get the following error while it is
trying to upload the file:
LmMsiCfg
Error opening DB: error = d<110>
Any ideas?
________________________________
This communication (including any attachments) is intended only for the use of
the individual or entity to which it is addressed, and may contain information
that is privileged, confidential and exempt from disclosure under applicable
law. If you are not the intended recipient, any dissemination, distribution or
copying of this communication is strictly prohibited. If you have received this
communication in error, please notify Vital Support Systems at 515 334 5700 and
delete or destroy all copies and the original document.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130701/7d883752/attachment-0001.html>
------------------------------
Message: 7
Date: Mon, 1 Jul 2013 10:25:45 -0500
From: Jonathan Charles <[email protected]>
To: Kevin Damisch <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [cisco-voip] Can't Configure CAD Client...
Message-ID:
<caplpvzikjk0+dwepxkw2kh1yr0mwzube+6scko2m2c90x_m...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Ran it in XP Mode and it worked fine; this is a Win7 64-bit issue....
On Mon, Jul 1, 2013 at 9:57 AM, Kevin Damisch
<[email protected]>wrote:
> Only way I could get past that was to run it on a Windows XP machine.
> No matter what compatibility mode we chose in Windows 7, we always got that
> error.
>
>
>
> Kevin Damisch
>
> Vital Support Systems
>
>
>
> *From:* cisco-voip [mailto:[email protected]] *On Behalf
> Of *Jonathan Charles
> *Sent:* Monday, July 01, 2013 9:10 AM
> *To:* [email protected]
> *Subject:* [cisco-voip] Can't Configure CAD Client...
>
>
>
> can't run client config tool (9.0.2), I get the following error while it
> is trying to upload the file:
>
>
>
>
>
> LmMsiCfg
>
> Error opening DB: error = d<110>
>
>
>
> Any ideas?
>
> ------------------------------
>
> This communication (including any attachments) is intended only for the
> use of the individual or entity to which it is addressed, and may contain
> information that is privileged, confidential and exempt from disclosure
> under applicable law. If you are not the intended recipient, any
> dissemination, distribution or copying of this communication is strictly
> prohibited. If you have received this communication in error, please notify
> Vital Support Systems at 515 334 5700 and delete or destroy all copies
> and the original document.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20130701/d441c529/attachment-0001.html>
------------------------------
Subject: Digest Footer
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
End of cisco-voip Digest, Vol 117, Issue 1
******************************************
