David, Those are the newer hardware revision phones that require a minimum of 9.3(1)SR1 firmware. You'll need to install that firmware on all of your CUCM nodes and restart TFTP service.
Brian On Mon, Mar 31, 2014 at 9:20 AM, David Zhars <[email protected]> wrote: > No, it's brand new. It appears to register, but with a strange extension > and the wrong time. > > The bottom of the phone has a little sticker that says "S/W: Must use > 9.3(1)SR1 or above". > > DZ > > > On Mon, Mar 31, 2014 at 9:18 AM, Andy <[email protected]> wrote: > >> Has it been on another cluster before you purchased it, you might have >> do delete the itl files. >> >> Regards >> >> Andy >> >> On 31/03/2014 13:55, David Zhars wrote: >> >> I bought a Cisco 7942 but it won't register properly on my UCM8.0 >> >> Do I need to download some files to the UCM, and if so, how do I do that? >> >> Thanks. >> >> DZ >> >> >> _______________________________________________ >> cisco-voip mailing >> [email protected]https://puck.nether.net/mailman/listinfo/cisco-voip >> >> >> > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
