Topic: Run on All Active Unified CM Nodes in 8.5 and higher So prior to 8.5 was the default to Run on All Active Unified CM Nodes?
I upgraded a working customer from CallManager 7.0 to 9.1.2. They have 3 subs. After the upgrade they couldn't make calls out a MGCP gateway. We put a check in the Route List for Run on All Active Unified CM Nodes and the problem is fixed. They have 30+ Route lists for 30+ sites. Each site has single PRI with MGCP. Small spoke offices. The have a single RL with a single RG pointed to a single MGCP gateway. The upgrade has none of the Route Lists with Run on All Active Unified CM Nodes. I can't think of a reason in this scenario (note we have no SIP) not to put the checkmark in the Route Lists for Run on All Active Unified CM Nodes. SRND Run on all active nodes http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/session_mgmt/deploy/8_5_1/overview.html
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
