It shoudl be possible to use an EEM script to have the gateways tell YOU when they're getting full. we could also set up some form of overflow / SIP trunk that you could use for the calls to your conference provider so that those specific outbound calls don't tie up your PSTN trunks. Additionally, if you have on premise video bridges, you have on premise audio bridges. we can spend some time looking at how you're using them, and almost certainly lessen your PSTN trunk usage significantly, without incurring additional hardware cost.
Wanna talk more? -Peter On Wed, Jun 18, 2014 at 10:40 AM, Wes Sisk (wsisk) <[email protected]> wrote: > If MGCP you can see the calls per DS-1 (PRI / CAS) in RTMT and create alerts > on the per-ds1 level but not per gateway and not in aggregate. > > RTMT provides the starting point for customization. You can use ‘show risdc…’ > from CLI on UCM to see the same counters. Or you can use AXL Serviceability > API to poll UCM and pull the values into your programming language of choice. > From there you can aggregate your sites or enterprise as necessary. You could > even use AXL to push in config changes automatically. > > The APIs are exposed natively. It takes a bit of programming to leverage > them. Cisco partners may excel here. > > -Wes > > On Jun 18, 2014, at 8:25 AM, Michael Rose VOIP <[email protected]> > wrote: > > My company frequently does mass meetings where one of the C level people will > talk and employees will dial into a conference number. My group has to > monitor gateways so that the active calls on each gateway does not exceed > 80%. If it does we put up blocks via CUCM to drop the call. > > What I am wondering is if there is a better way to do this. Currently what we > do is split the offices among the team and each of us logs into the voice > gateways and watches the active calls. How we monitor the active calls > depends on the person and the size of the location. Each of us has to watch > at least two gateways and we don't cover every location, just the major ones > since we've got offices everywhere. > > Is there a tool where we can plug in the voice gateway names and login > credentials and it will just spit out active calls or number of active calls > to a specific number? We've tried using RTMT but there are just so many > gateways we can't monitor them all very well using that tool. I wanted to > know what was out there before we try and build something on our own. > > Do you guys have a better way to monitor gateway thresholds on over 11 sites > with like 44 voice gateways? > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
