It's been awhile, but we had an ES 7.1.5..... This ES was for a Raid driver issues with the MCS. We upgraded to 8.X (don't remember the exact ver.) but the UPGRADE reverted back to the Raid driver issue. We ended up rebuilding with a fresh install to each of the subs - then did the pub.
Check with TAC I believe they will tell you with an ES upgrade you should DR. Neal Haas IT Analyst, Communications From: cisco-voip [mailto:[email protected]] On Behalf Of Jason Aarons (AM) Sent: Thursday, September 04, 2014 5:15 PM To: cisco-voip ([email protected]) Subject: [cisco-voip] CUCM 7.1.5-12009-1 direct upgrade to 10.5? So it appears this customer has an Engineering Special for Callmanager 7.1.5-12009-1 that isn't listed on the Compatibility matrix (ESs never are). Can they direct upgrade to 10.5.1 or do I need to upgrade them to 7.1(5b) first then 10.5.1? Jason Aarons Consultant Dimension Data +1-904-338-3245
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
