Wow, 10.6 snuck in there… looks like they got e-mail support for finesse in 
there which is a great help.

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Josh 
Warcop
Sent: Thursday, December 18, 2014 2:18 PM
To: Ashwani R; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Consolidate two separate UCCX cluster and migrate to 
9.x

First - your target version should be the 10.6 release which is Communications 
Manager 10.5.2 and CCX 10.6.1.

You merging of UCCX should also include going to Finesse and dropping CAD.

If you have a non-overlapping dial plan the merging is simple. However if you 
have to do a lot of dial plan work it can be a good challenge.

In this case I would support the decision to build fresh and merge into one new 
cluster. This will allow you to build new dial plans, new UCCX integration, and 
move site by site or by application.

Sent from my Windows Phone
________________________________
From: Ashwani R<mailto:ashw...@ranpise.com>
Sent: ‎12/‎18/‎2014 8:39 AM
To: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: [cisco-voip] Consolidate two separate UCCX cluster and migrate to 9.x
Team,
I have a customer who has two separate UCCX HA cluster with their respective 
CUCM cluster (merging two companies).  They would like to merge both CUCM and 
UCCX cluster to one cluster and upgrade them to 9.x.  They are running CUCM 
version 7.1.3.10000-11 and UCCX cluster running 7.0(2) Build254.  What is the 
best way to do this? Can they keep both historical data from UCCX and move them 
to 9.x ?  I know this is not possible but just want to see if anyone has done 
it before.  We have already built new 9.x CUCM and UCCX cluster with new set of 
IP addresses with blank configurations. Any help will be appreciated.
Thanks,
Ashwani
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to