CAD and Finesse can't be active at the same time unless you are on version 10.6
Sent from my iPhone > On Dec 18, 2014, at 9:02 PM, Kevin Przybylowski <kev...@advancedtsg.com> > wrote: > > Do you mean the last version? They’ve been together the last few revisions. > > > From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Mike > Sent: Thursday, December 18, 2014 6:22 PM > To: Josh Warcop > Cc: cisco-voip@puck.nether.net > Subject: Re: [cisco-voip] Consolidate two separate UCCX cluster and migrate > to 9.x > > UCCX 10.6 supports CAD and Finesse as ️Co-resident and rumor has it that is > the only version that will support this configuration so plan accordingly. > > Sent from my iPhone > > On Dec 18, 2014, at 3:17 PM, Josh Warcop <j...@warcop.com> wrote: > > First - your target version should be the 10.6 release which is > Communications Manager 10.5.2 and CCX 10.6.1. > > You merging of UCCX should also include going to Finesse and dropping CAD. > > If you have a non-overlapping dial plan the merging is simple. However if you > have to do a lot of dial plan work it can be a good challenge. > > In this case I would support the decision to build fresh and merge into one > new cluster. This will allow you to build new dial plans, new UCCX > integration, and move site by site or by application. > > Sent from my Windows Phone > From: Ashwani R > Sent: 12/18/2014 8:39 AM > To: cisco-voip@puck.nether.net > Subject: [cisco-voip] Consolidate two separate UCCX cluster and migrate to 9.x > > Team, > > I have a customer who has two separate UCCX HA cluster with their respective > CUCM cluster (merging two companies). They would like to merge both CUCM and > UCCX cluster to one cluster and upgrade them to 9.x. They are running CUCM > version 7.1.3.10000-11 and UCCX cluster running 7.0(2) Build254. What is the > best way to do this? Can they keep both historical data from UCCX and move > them to 9.x ? I know this is not possible but just want to see if anyone has > done it before. We have already built new 9.x CUCM and UCCX cluster with new > set of IP addresses with blank configurations. Any help will be appreciated. > > Thanks, > > Ashwani > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip