Just shut down the controller. Controller t1 x/x/x Shutdown
Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA Network Engineer Direct Voice: 443.541.1518 Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts> From: cisco-voip [mailto:[email protected]] On Behalf Of Lelio Fulgenzi Sent: Tuesday, February 03, 2015 9:42 AM To: Cisco-voip ([email protected]) Subject: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP) port? Good morning all, Here's hoping the snow is clearing up if that's what you had outside your home/office these last few days! I'm looking for a quick way to disable a PRI PSTN (MGCP) port on my 3945 gateway. I need to do some tests on a gateway in my local building, but that means disabling the first outbound PSTN port on a remote gateway. Normally I'd just unplug it, but there's just too much snow outside to make the trek. ;) Thanks! Lelio --- Lelio Fulgenzi, B.A. Senior Analyst, Network Infrastructure Computing and Communications Services (CCS) University of Guelph 519‐824‐4120 Ext 56354 [email protected]<mailto:[email protected]> www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
