Might want to pull CallManager traces and see what happens when it tries to allocate the video conference bridge. Do you have the MCU in the same device pool as the rest of the devices?
On Wed, Feb 4, 2015 at 8:25 AM, Andy <[email protected]> wrote: > Hi, > I’m in the process of deploying DX80 and 70 endpoints that are registered > to CUCM, that piece is ok. > I can place calls between them and audio conferencing is fine, my issue is > with a conference with video……. > > I have an MCU5310 running version 4.5(1.45) which I have registered with > CUCM 9.1.2.11900-12 as a Cisco Telepresence MCU. > That seems to be fine. > > So I have created a new device pool and MRGL which all participants from > an end point perspective are in (1x dx80, 1x dx70, 1x8941, 1x Jabber Client) > They are all in the same region. > > But if I try and create a conference from Jabber when I try to merge the > participants it says Waiting to Join and the DX plays MOH > I get the same effect if I try to start the con on one of the DX endpoints. > > Do I need to setup a SIP connection between the MCU and the CUCM? > in the 4.4 guide its gives some config settings on SIP but in the 4.5 code > they are not available. > > I don’t have access to the 4.4 code to downgrade at the moment. > > Any pointers would be gratefully received. > > > Andy > [email protected] > > > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
