Hi Brian, Yes the MCU is in the same Device Pool I’ll pull some new logs and have a look through them again
Andy [email protected] > On 4 Feb 2015, at 16:08, Brian Meade <[email protected]> wrote: > > Might want to pull CallManager traces and see what happens when it tries to > allocate the video conference bridge. Do you have the MCU in the same device > pool as the rest of the devices? > > On Wed, Feb 4, 2015 at 8:25 AM, Andy <[email protected] > <mailto:[email protected]>> wrote: > Hi, > I’m in the process of deploying DX80 and 70 endpoints that are registered to > CUCM, that piece is ok. > I can place calls between them and audio conferencing is fine, my issue is > with a conference with video……. > > I have an MCU5310 running version 4.5(1.45) which I have registered with CUCM > 9.1.2.11900-12 as a Cisco Telepresence MCU. > That seems to be fine. > > So I have created a new device pool and MRGL which all participants from an > end point perspective are in (1x dx80, 1x dx70, 1x8941, 1x Jabber Client) > They are all in the same region. > > But if I try and create a conference from Jabber when I try to merge the > participants it says Waiting to Join and the DX plays MOH > I get the same effect if I try to start the con on one of the DX endpoints. > > Do I need to setup a SIP connection between the MCU and the CUCM? > in the 4.4 guide its gives some config settings on SIP but in the 4.5 code > they are not available. > > I don’t have access to the 4.4 code to downgrade at the moment. > > Any pointers would be gratefully received. > > > Andy > [email protected] <mailto:[email protected]> > > > > > _______________________________________________ > cisco-voip mailing list > [email protected] <mailto:[email protected]> > https://puck.nether.net/mailman/listinfo/cisco-voip > <https://puck.nether.net/mailman/listinfo/cisco-voip> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
