I've run into this before TX vs Texas Use this to view your CSR and then fix via the set web-security commands etc
http://certlogik.com/decoder/ -----Original Message----- From: cisco-voip [mailto:[email protected]] On Behalf Of Gary Parker Sent: Thursday, February 5, 2015 11:55 AM To: [email protected] Cc: Cisco VOIP Subject: Re: [cisco-voip] 10.5.1 UCCX Certificate for Finesse > On 5 Feb 2015, at 16:37, Jose Colon II <[email protected]> wrote: > > I am trying to generate certificate request from 10.5.1 UCCX box and the cert > it generates is not working with verasign. It tells me "The State Name in the > CSR cannot be abbreviated" > > Anyone have any suggestions? Hi Jose, have a look at your CSR using: openssl req -text -noout -verify -in CSR.csr where CSR.csr is your csr file. Mine, for example, reads: Subject: C=GB, ST=Leicestershire, L=Loughborough, O=Loughborough University, OU=ITS, CN=tainter.lboro.ac.uk/serialNumber=xxxxxxxxxxxxxxxxxxxxxxxxx On the “Subject:” line is the entry for ST= an abbreviated version of your State name? If so I’d imagine you’ll have to login on the command line for the server and use “set web-security” to change the State to a proper value. If I had ST=Leics it would also likely fail. Be aware that this *may* make you have to relicense the server (I’m not sure if changing state is enough to trigger this). --- /-Gary Parker----------------------------------f--\ | Unified Communications Service Manager | n Loughborough University IT Services | | Tel: +441509635635 Mob: +447989172258 o | http://delphium.lboro.ac.uk/pubkey.txt | \r----------------------------------------------d-/ _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
