Hi Norm, That depends on how you have your system configured. If you are running the full version of CUCM, look under System/Service Parameters and select your server then the Call Manager service. Look at the setting for "Drop Ad Hoc Conference" and see how yours is set.
You should have the choices of Never, When Conference Controller Leaves, or When No OnNet Parties Remain in the Conference. Hope this helps. Teressa Corson, CCNP, CCDA, CCNP-Voice TSS VI, Operations Network Operations State of NH, Department of Information Technology 603-223-5727 www.nh.gov/doit<http://www.nh.gov/doit> Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either in whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. From: cisco-voip [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, April 17, 2015 9:33 AM To: [email protected] Subject: [cisco-voip] Conferencing on a Cisco phone When someone initiates a conference call from their phone does the conference call stay active if they drop out or does the conference end when they hang up. I assume it drops the conference but want to double check. Thanks Norm Nicholson Telecom Analyst City of Kitchener (519) 741-2200 x 7000
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
