Could also be a CTL issue if your doing secure ... Thanks,
Ryan -------- Original Message -------- From: Ryan Huff <[email protected]> Sent: Thursday, April 23, 2015 08:48 PM To: Jonathan Charles <[email protected]> Subject: Re: [cisco-voip] Cisco 8851 not failing over to backup circuit... CC: [email protected] >What load on the 51s and is that load version present on all nodes? > >Thanks, > >Ryan > >-------- Original Message -------- >From: Jonathan Charles <[email protected]> >Sent: Thursday, April 23, 2015 08:44 PM >To: Ryan Huff <[email protected]> >Subject: Re: [cisco-voip] Cisco 8851 not failing over to backup circuit... >CC: [email protected] > >>Settings are identical... I have no idea why only the 8831 is registering >>and the 8851s aren't... >> >> >> >>Jonathan >> >>On Thu, Apr 23, 2015 at 7:37 PM, Ryan Huff <[email protected]> wrote: >> >>> Same ccm group/device pool .... etc? >>> >>> Thanks, >>> >>> Ryan >>> >>> >>> -------- Original Message -------- >>> From: Jonathan Charles <[email protected]> >>> Sent: Thursday, April 23, 2015 08:35 PM >>> To: [email protected] >>> Subject: [cisco-voip] Cisco 8851 not failing over to backup circuit... >>> >>> We have CUCM 8.6.2 with Cisco 8851, Cisco 8831 phones at a remote >>> location; they are connected over MPLS and a Peplink Balance VPN as a >>> backup. >>> >>> When we yank the MPLS, the 8831 registers with CUCM and works fine.... the >>> 8851s do NOT. >>> >>> Any reason the 8851 would act differently? >>> >>> >>> >>> >>> Jonathan >>>
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
