No secure; the phone works fine when the MPLS is up... this doesn't make sense to me.
Jonathan On Thu, Apr 23, 2015 at 8:22 PM, Ryan Huff <[email protected]> wrote: > Could also be a CTL issue if your doing secure ... > > Thanks, > > Ryan > > > -------- Original Message -------- > From: Ryan Huff <[email protected]> > Sent: Thursday, April 23, 2015 08:48 PM > To: Jonathan Charles <[email protected]> > Subject: Re: [cisco-voip] Cisco 8851 not failing over to backup circuit... > CC: [email protected] > > What load on the 51s and is that load version present on all nodes? > > Thanks, > > Ryan > > > -------- Original Message -------- > From: Jonathan Charles <[email protected]> > Sent: Thursday, April 23, 2015 08:44 PM > To: Ryan Huff <[email protected]> > Subject: Re: [cisco-voip] Cisco 8851 not failing over to backup circuit... > CC: [email protected] > > Settings are identical... I have no idea why only the 8831 is registering > and the 8851s aren't... > > > > Jonathan > > On Thu, Apr 23, 2015 at 7:37 PM, Ryan Huff <[email protected]> wrote: > >> Same ccm group/device pool .... etc? >> >> Thanks, >> >> Ryan >> >> >> -------- Original Message -------- >> From: Jonathan Charles <[email protected]> >> Sent: Thursday, April 23, 2015 08:35 PM >> To: [email protected] >> Subject: [cisco-voip] Cisco 8851 not failing over to backup circuit... >> >> We have CUCM 8.6.2 with Cisco 8851, Cisco 8831 phones at a remote >> location; they are connected over MPLS and a Peplink Balance VPN as a >> backup. >> >> When we yank the MPLS, the 8831 registers with CUCM and works fine.... >> the 8851s do NOT. >> >> Any reason the 8851 would act differently? >> >> >> >> >> Jonathan >> > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
