Hi Ryan, I am no QOS expert either but I think you will need to match the protocol RTP Audio, to pickup any packets that haven't been marked with EF, although I think the standard phone template in CUCM does this.
class-map match-all VOICE match protocol rtp audio On Sat, May 2, 2015 at 11:55 PM, Ryan Huff <[email protected]> wrote: > The below OUT map, applied in the output direction on a WAN(mpls) facing > interface, should put RTP, Signaling and anything from access-list 51 at > the top of the heap and give everything else best effort. > > Not that anything isn't working, I just want to make sure I'm not making > something up ... etc. Seems basic but I don't get to play with QOS everyday > :) > > router-3925#sh run | sec class-map|policy-map|access-list 51 > ! > ! > class-map match-all VOICE > match ip dscp ef > match access-group 51 > class-map match-any CALL-SIGNALING > match ip dscp cs3 > match ip dscp af31 > ! > ! > policy-map WAN-OUT > class VOICE > bandwidth percent 30 > class CALL-SIGNALING > bandwidth percent 10 > class class-default > fair-queue > ! > ! > access-list 51 permit 001.002.003.004 0.0.0.255 > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > > -- - Nick
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
