The below OUT map, applied in the output direction on a WAN(mpls) facing
interface, should put RTP, Signaling and anything from access-list 51 at the
top of the heap and give everything else best effort.
Not that anything isn't working, I just want to make sure I'm not making
something up ... etc. Seems basic but I don't get to play with QOS everyday :)
router-3925#sh run | sec class-map|policy-map|access-list 51
!
!
class-map match-all VOICE
match ip dscp ef
match access-group 51
class-map match-any CALL-SIGNALING
match ip dscp cs3
match ip dscp af31
!
!
policy-map WAN-OUT
class VOICE
bandwidth percent 30
class CALL-SIGNALING
bandwidth percent 10
class class-default
fair-queue
!
!
access-list 51 permit 001.002.003.004 0.0.0.255
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
