Hello! I'm trying to get a SIP trunk out to a regional SP (Lumos) configured. I need to get CME setup to register numbers with their sip proxy, but the registration is not happening and i'm not seeing any register messages debugs from debug ccsip messages to troubleshoot from. So I think maybe CME isn't trying? What should trigger CME to try and register these numbers?
My config looks like this (some ephones/ephone-dns up and registered) - authentication credentials were provided from Lumos. IOS 15.4(3)M2 msu-tmp-access#sh run | s sip-ua sip-ua credentials username 304-929-0300 password 7 blah realm sbc.ia.ntelos.net authentication username 304-929-0300 password 7 blah retry register 10 registrar dns:sbc.ia.ntelos.net:5060 expires 120 sip-server dns:sbc.ia.ntelos.net:5060 ! msu-tmp-access#sho run | s voice service voice service voip ip address trusted list ipv4 216.12.114.195 address-hiding allow-connections sip to sip fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none sip bind control source-interface GigabitEthernet0/2 bind media source-interface GigabitEthernet0/2 registrar server options-ping 60 -- Ed Leatherman
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
