Num-exp is nasty to troubleshoot.

Dennis Heim | Emerging Technology Architect (Collaboration)
World Wide Technology, Inc. | +1 314-212-1814
[twitter]<https://twitter.com/CollabSensei>
[chat]<xmpp:[email protected]>[Phone]<tel:+13142121814>[video]<sip:[email protected]>
“There is a fine line between Wrong and Visionary. Unfortunately, you have to 
be a visionary to see it." – Sheldon Cooper

Click here to join me in my Collaboration Meeting 
Room<https://wwt.webex.com/meet/dennis.heim>

From: cisco-voip [mailto:[email protected]] On Behalf Of Jason 
Aarons (AM)
Sent: Thursday, July 16, 2015 1:11 PM
To: Claiton Campos <[email protected]>; [email protected]
Subject: Re: [cisco-voip] Cisco UCCX with num-exp problem

The num-exp occur before the dial-peer match etc.  You should have no issues 
using this.

However if CUCM and MGCP and using a Translation Pattern may break CTI 
Redirects.  Gateway has to have direct reachability to CTI Route Point and CTI 
Port and Agent.  You are not doing this.

Can you dial 987 form a IP Phone to Trigger 987 ? Dialed Number Analyzer?  In 
your script do you have a test prompt “You have reached a test prompt” ? before 
you attempt to invoke  an Agent?

Reading your question is somewhat confusing.  Break your troubleshooting down 
step by step.   Eg is CTI Route Point registered in CUCM, is correct IP?  Have 
you tried a reactive script debug?

From: cisco-voip [mailto:[email protected]] On Behalf Of 
Claiton Campos
Sent: Thursday, July 16, 2015 12:55 PM
To: [email protected]<mailto:[email protected]>.
Subject: [cisco-voip] Cisco UCCX with num-exp problem


Does anyone know if there is any problem in using translation number with UCCX? 
For example, a costumer receives the last 4 digits of the operator and 
translates it into your gateway to a number of 3 digits
using the  num-exp, the setting he has is as follows:

num-exp 1234 987

there is a dial-peer with destination- pattern 987 and session target 
<cucm_ip_address> on the gateway. In uccx there is a trigger with the number 
987, however when a call is made it does not ring on the phone is just calling.


itevomcid
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to