Had Telco switch from ni1 to ni2. After they reset the PRI, outbound calls were
not showing their External Number Mask.
Below is what the Debug shows.
Display i = 0xB1, 'Jane Doe'
Calling Party Number i = 0x0081, 'XXXXXXXXXX'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, 'XXXXXXXXXX'
Plan:Unknown, Type:Unknown
Had Telco look into it and they want me to change the plan and type. I looked
at a debug prior to the change and it shows the same thing but our mask was
showing up.
[cid:[email protected]]
Aaron Jenkins
IT Technician
P: 440.937.7901 | C: 440.420.3296 |
[email protected]<mailto:[email protected]>
Web: www.cityofavon.com<http://www.cityofavon.com/> | Facebook: City of Avon,
Ohio<https://www.facebook.com/AvonOH/> | Twitter:
@CityofAvonOH<https://twitter.com/CityofAvonOH>
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
