Hi All, I'm looking for some possible tips to try and diagnose some internal voice quality issues which we seem to regularly be having...
We have a multi-site deployment of a Cisco CME using Cisco 7960 IP Phones running Skinny and using firmware c2800nm-adventerprisek9-mz.151-3.T4.bin. As I understand were not using a standard deployment via having the phones go over the private Ethernet service to the PBX instead of locally hosted PBX's, however I can't see why this would be an issue. Each site is configured with QoS on switches/routers and WAN interfaces as per cisco best practices and none of the sites wan links are particularly busy either. The PBX/Router is centred In our Datacentre and our 3 sites are connected via private Ethernet circuits, below shows the latency between each site. >From PBX/Router to Each Site, Site A - round-trip min/avg/max = 32/33/48 ms Site B - round-trip min/avg/max = 16/16/20 ms Site C - round-trip min/avg/max = 28/31/36 ms >From Site A to Each Site, PBX - round-trip min/avg/max = 32/35/40 ms Site B - round-trip min/avg/max = 48/48/48 ms Site C - round-trip min/avg/max = 60/62/64 ms >From site B to each site, PBX - round-trip min/avg/max = 16/16/20 ms Site A - round-trip min/avg/max = 44/47/68 ms Site C - round-trip min/avg/max = 44/46/48 ms Site C to each Site PBX - round-trip min/avg/max = 28/31/36 ms Site A - round-trip min/avg/max = 60/63/88 ms Site B - round-trip min/avg/max = 44/46/48 ms Any Ideas? Regards, Quenten
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
