Is MRA in play? If not, then the below doc should be what you need. There is also a CE8 on CUCM 11.x, but it is all relatively the same.Watch out for running CE8 on SX20, there are peripheral requirements older SX20 units may not meet.
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf On Thu, May 11, 2017 at 5:14 PM, Terry Oakley <[email protected]> wrote: > Does anyone have a process document for adding a SX 20 unit to Call > Manager environment to be a video endpoint? We have Expressway C and E in > place as well as IM and Presence. We currently have the SX20’s going > through a video gateway that has just failed and is EOS/EOL. > > > > Any assistance would be wonderful. > > > > Environment > > > > CUCM 10.5 > > IM and Presence 10.5 > > Expressway C and E. > > SX 20 (5 units) > > > > Thank you in advance > > > > Terry > > > > *Terry Oakley* > > Telecommunications Coordinator *| *Information Technology Services > > *Red Deer College **|*100 College Blvd. *|* Box 5005 *| *Red Deer *|* Alberta > *| *T4N 5H5 > > work (403) 342-*3521 **| * FAX (403) 343-4034 > > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
