Thank you Matt. MRA is not in play… at least not right now. ☺ From: Matt Jacobson [mailto:[email protected]] Sent: May 11, 2017 8:20 AM To: Terry Oakley <[email protected]> Cc: [email protected] Subject: Re: [cisco-voip] SX20 add to Call Manager
Is MRA in play? If not, then the below doc should be what you need. There is also a CE8 on CUCM 11.x, but it is all relatively the same.Watch out for running CE8 on SX20, there are peripheral requirements older SX20 units may not meet. http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf On Thu, May 11, 2017 at 5:14 PM, Terry Oakley <[email protected]<mailto:[email protected]>> wrote: Does anyone have a process document for adding a SX 20 unit to Call Manager environment to be a video endpoint? We have Expressway C and E in place as well as IM and Presence. We currently have the SX20’s going through a video gateway that has just failed and is EOS/EOL. Any assistance would be wonderful. Environment CUCM 10.5 IM and Presence 10.5 Expressway C and E. SX 20 (5 units) Thank you in advance Terry Terry Oakley Telecommunications Coordinator | Information Technology Services Red Deer College |100 College Blvd. | Box 5005 | Red Deer | Alberta | T4N 5H5 work (403) 342-3521 | FAX (403) 343-4034<tel:(403)%20343-4034> _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
