T1 PRI commands are substantially different if that is in play. Sent from my iPhone
On May 12, 2017, at 7:35 AM, Matthew Loraditch <[email protected]<mailto:[email protected]>> wrote: The vast majority of commands are the same. Netflow stuff is changed completely if you use that. Outside of updating interface names, most of our templates just worked. Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA Network Engineer Direct Voice: 443.541.1518 Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts> From: cisco-voip [mailto:[email protected]] On Behalf Of [email protected]<mailto:[email protected]> Sent: Friday, May 12, 2017 7:31 AM To: [email protected]<mailto:[email protected]> Subject: [cisco-voip] Migrating a Cisco 2901 to a Cisco 4321 We have a base config we use for building our 2901/11’s . Will this work on the 4321 or do I have to start from scratch. Thanks Norm Nicholson Telecom Analyst City of Kitchener (519) 741-2200 x 7000 _______________________________________________ cisco-voip mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
