Rashmi Patel ( [email protected] ) - 12:31 PM Q: Does that mean conference resource will be used from NIM DSP not from mother board DSP resources Priority: N/A Dolan Spitler - 12:57 PM A: When it comes to IP services (xcoding, conferencing, MTP) The motherboard DSP can be pooled with the NIM DSPs to increase the DSPfarm scale
Source: https://communities.cisco.com/docs/DOC-7823 (look for the 4000 event on Oct 16th) On Fri, May 12, 2017 at 1:17 PM Brian Meade <[email protected]> wrote: > My understanding is any dspfarm resources such as conferencing/transcoding > use the motherboard resources while the ones on the NIM are just for the > voice ports themselves. > > On Fri, May 12, 2017 at 11:51 AM, Jose Colon II <[email protected]> > wrote: > >> If you will be using DSP's you will need to decided if you will need them >> on the motherboard or on the T1 NIM. On the motherboard I believe it can >> only be used for conferencing. You will need them on the NIM for >> transcoding. >> >> On May 12, 2017 6:42 AM, "Ryan Huff" <[email protected]> wrote: >> >>> T1 PRI commands are substantially different if that is in play. >>> >>> Sent from my iPhone >>> >>> On May 12, 2017, at 7:35 AM, Matthew Loraditch < >>> [email protected]> wrote: >>> >>> The vast majority of commands are the same. Netflow stuff is changed >>> completely if you use that. Outside of updating interface names, most of >>> our templates just worked. >>> >>> >>> >>> >>> >>> >>> >>> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA >>> Network Engineer >>> Direct Voice: 443.541.1518 <(443)%20541-1518> >>> >>> Facebook <https://www.facebook.com/heliontech?ref=hl> | Twitter >>> <https://twitter.com/HelionTech> | LinkedIn >>> <https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> >>> | G+ <https://plus.google.com/+Heliontechnologies/posts> >>> >>> >>> >>> *From:* cisco-voip [mailto:[email protected] >>> <[email protected]>] *On Behalf Of * >>> [email protected] >>> *Sent:* Friday, May 12, 2017 7:31 AM >>> *To:* [email protected] >>> *Subject:* [cisco-voip] Migrating a Cisco 2901 to a Cisco 4321 >>> >>> >>> >>> >>> >>> We have a base config we use for building our 2901/11’s . Will this work >>> on the 4321 or do I have to start from scratch. >>> >>> >>> >>> >>> >>> >>> >>> Thanks >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> *Norm Nicholson* >>> >>> *Telecom Analyst* >>> >>> *City of Kitchener* >>> >>> *(519) 741-2200 x 7000 <(519)%20741-2200>* >>> >>> >>> >>> >>> >>> _______________________________________________ >>> cisco-voip mailing list >>> [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-voip >>> >>> >>> _______________________________________________ >>> cisco-voip mailing list >>> [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-voip >>> >>> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >> > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
