If you're talking about using a 2900 series router versus something like a
VG224, its essentially the same difference as far as technicalities go. I have
one in my current environment running off an FXS port on our 4431 gateway, just
have it configured via SCCP on CUCM.
From: cisco-voip [mailto:[email protected]] On Behalf Of Hamu
Ebiso
Sent: Tuesday, May 23, 2017 3:51 PM
To: James O'Neill <[email protected]>; [email protected]
Subject: Re: [cisco-voip] BOGEN PAGING SYSTEM.
I have a router with 4 FXO port and i am thinking about bypassing VG and
directly connecting to Bogan Paging system however, i haven't done this kind of
configuration and that is the reason i am asking.
I am just wondering if someone has a working config.
Thanks
Hamu
Sent from my Sprint Samsung Galaxy S(r) 6.
-------- Original message --------
From: James O'Neill <[email protected]<mailto:[email protected]>>
Date: 5/23/17 1:11 PM (GMT-06:00)
To: Hamu Ebiso <[email protected]<mailto:[email protected]>>,
[email protected]<mailto:[email protected]>
Subject: RE: BOGEN PAGING SYSTEM.
We use our SRST routers with FXO cards as the gateway for our PAs. We've used
them successful with Bogan in the past using the module that had the POTS
connection. We've also used them successfully with Valcom PA equipment.
I've found that if you have a POTS/Analog connection and know the DTMF codes
you can use an FXO port as the gateway on most PA vendors. Some are a little
tricky and might require a port created by punching down to a 66 block.
James O'Neill
From: cisco-voip [mailto:[email protected]] On Behalf Of Hamu
Ebiso
Sent: Tuesday, May 23, 2017 11:48 AM
To: [email protected]<mailto:[email protected]>
Subject: [cisco-voip] BOGEN PAGING SYSTEM.
Hi all,
Has anyone know how to connect bogen paging system yo VG for paging.
We are converting avaya phone system to Cisco and the customer have old paging
system wich is bogen. We ordered VG for their analog and I don't know we havr
to move from yhat system to VG. If we have to connect directly from bouce
gateway or some other way to connect to VG.
Thanks
Hamu
Sent from my Sprint Samsung Galaxy S(r) 6.
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed. If
you have received this email in error please notify the system manager. Please
note that any views or opinions presented in this email are solely those of the
author and do not necessarily represent those of Pasadena I.S.D. Finally, the
recipient should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by any virus
transmitted by this email.
Pasadena ISD is an equal opportunity employer and provides equal access to all
students
http://www1.pasadenaisd.org/cms/One.aspx?portalId=80772&pageId=494145<http://cp.mcafee.com/d/1jWVIq3x0SyMqenTT3hPtVwTsSyyO-OCe78CzASyyO-OCeuvpdEEILLfzDDT3qabxEVd7dXThKr8qHaNk54SRtxIrsKr9JGX3oSVsSg89CzBxcQsLZvAnQNNEVss7tuVtdAszOrX9EVd7dNMXG8FHnjlLtPBgY-F6lK1FJ4SyrLRQnAS77D3hOMrKr01B4umSCEv3pkgU03BBqo68vMf3OiRoPQYdgeuKe79J104bqhYdgeod7b2b3VKQGmGncRAIn8lrxrW0FpKNnwqj-f0QSyUMqenPobZ8Qg6BKQGmGncRAIqnjh0cxw93gcd40m40A6wM96y0o0UM2hErUSOedMZij>
Confidentiality Note: This message is intended for use only by the individual
or entity to which it is addressed and may contain information that is
privileged, confidential, and exempt from disclosure under applicable law. If
the reader of this message is not the intended recipient or the employee or
agent responsible for delivering the message to the intended recipient, you are
hereby notified that any dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this communication
in error, please contact the sender immediately and destroy the material in its
entirety, whether electronic or hard copy. Thank you
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
