You might find that editing the softkey template and relocating the hold softkey away from the end call softkey for the connected state might be a solution (that way you don’t have to alter the behavior of the pots line).
Thanks, Ryan On Sep 25, 2017, at 3:31 PM, Loren Hillukka <lchillu...@hotmail.com<mailto:lchillu...@hotmail.com>> wrote: I have a plant building with a 4351 connected to a paging system via an FXO port. Site has phones connected to CUCM, gw is not MGCP. Users at the plant are notorious for paging, then pressing "hold" instead of "end call" on the Cisco phones they page from. The plant floor then gets MOH playing and nobody else can page until I shut/no shut the port or they unplug the cable from the fxo port. Any idea if a max length of call timer can be applied only to that one fxo port, to disconnect any call to it after 15 seconds or so? Thanks _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip