Hi Everyone,
Has any body experiencing configuring RICOH MP C5503 for SIP FAX on Either CUCM as 3th party SIP or on voice gateway? 11.0 CUCM SIP FAX: RICOH MP C5503 Voice router 4431. I have configured Route Pattern in CUCM and pointed the router group and then to the voice gateway. I configured Dial peer in voice router but when I dial the FAX is not picking up. When I try to dial out, nothing is happening as well. Dial Peer as shown below: dial-peer voice 500 voip description Ricoh 072 destination-pattern 10 digit # session protocol sipv2 session target ipv4:x.x.x.x voice-class codec 1 dtmf-relay rtp-nte no vad ! dial-peer voice 501 voip description Ricoh 073 destination-pattern 10 digit # session protocol sipv2 session target ipv4:x.x.x.x voice-class codec 1 dtmf-relay rtp-nte I'm just wondering if I'm missing any configuration. if you can point to the any document that I can follow to make sure everything is setup correctly, that would be appreciated.
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
