I usually do 6000 across the board. This pretty much maxes out any endpoint.
On Tue, Jul 23, 2019 at 9:19 AM Lelio Fulgenzi <[email protected]> wrote: > > > Interesting… Quite a few phones support immersive. > > > > And I just found out I’ve got 2 tbps (terabits, not tablespoons) of > immersive video bandwidth. Woo Hoo! > > > > What are people using for default region settings? Assume all are high > speed, low latency connections (except for off-premise). > > > > > > > > --- > > *Lelio Fulgenzi, B.A.* | Senior Analyst > > Computing and Communications Services | University of Guelph > > Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | > N1G 2W1 > > 519-824-4120 Ext. 56354 | [email protected] > > > > www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook > > > > [image: University of Guelph Cornerstone with Improve Life tagline] > > > > *From:* cisco-voip <[email protected]> *On Behalf Of *Anthony > Holloway > *Sent:* Monday, July 22, 2019 10:22 AM > *To:* Jason Aarons (Americas) <[email protected]> > *Cc:* cisco-voip ([email protected]) <[email protected]> > *Subject:* Re: [cisco-voip] CUCM 12.5 Regions > Max Session Bit Rate for > Video vs Immersive Video > > > > Did you already change the value of Service Parameter: Use Video > BandwidthPool for Immersive Video Calls? > > > > The classification is per version of CUCM, and thus can be queried in > CUCM. See below from SRND. > > > > *Endpoint Classification* > Cisco TelePresence endpoints have a fixed non-configurable Video Call > Traffic Class of immersive and are identified by Unified CM as *immersive*. > Telepresence endpoints are defined in Unified CM by the device type. When a > device is added in Unified CM, any device with TelePresence in the name of > the device type is classified as *immersive*, as are the generic > single-screen and multi-screen room systems. Another way to check the > capabilities of the endpoints in the Unified CM is to go to the *Cisco > Unified Reporting Tool > System Reports > Unified CM Phone Feature List*. > In the feature drop down list, select *Immersive Video Support for > TelePresence Devices* ; in the product drop down list, select *All*. This > will display all of the device types that are classified as *immersive*. > All other endpoints have a fixed Video Call Traffic Class of *desktop* > due to their lack of the non-configurable *immersive *attribute. > > > > Source: CUCM 11.x SRND > <https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/cac.html#pgfId-1489913> > > > > On Sun, Jul 21, 2019 at 6:51 PM Jason Aarons (Americas) < > [email protected]> wrote: > > > > > > Where is there a definitive list of what is Immersive? Is a Room 55 > Immersive? > > > > From my training the left is 88xx video and right were products formerly > made by Tandberg such as Room 55/DX80/SX80/MX300 etc > > > > In a Room 55 trying to figure out if it is left or right side. > > > > > > -jason > > > > > > > > This email and all contents are subject to the following disclaimer: > "http://www.dimensiondata.com/emaildisclaimer"; > <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx> > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
