...and I just realized I did it in 12.5. Sent from my iPhone
> On 1 Aug 2019, at 18:32, Anthony Holloway <[email protected]> > wrote: > > I tried the double quote trick at first, based on a forum post I saw, but it > didn't work for me. > > In the same post, someone posted a sample Lua script, but that also did not > work for me, so I wrote my own. > > Post in question: > https://community.cisco.com/t5/unified-communications/hunt-pilot-alerting-name-not-working-in-11-5-su6/td-p/3867489 > > > YMMV. > >> On Thu, Aug 1, 2019 at 12:09 PM James Buchanan <[email protected]> >> wrote: >> You can also put the alerting name in double-quotes and get the same result, >> but I like the LUA script better. I used it a few days ago. >> >> Sent from my iPhone >> >>> On 1 Aug 2019, at 18:05, Jinto Alakkal Kunjumon <[email protected]> >>> wrote: >>> >>> Thanks for sharing this Anthony, cool stuff. I am also sharing a link which >>> might be helpful for everyone. >>> >>> >>> >>> https://community.cisco.com/t5/collaboration-voice-and-video/a-guide-to-sip-normalization-on-cucm-and-lua-scripting/ba-p/3099409 >>> >>> >>> >>> Jinto. >>> >>> >>> >>> >>> >>> From: cisco-voip <[email protected]> On Behalf Of Anthony >>> Holloway >>> Sent: Thursday, August 01, 2019 12:40 PM >>> To: Cisco VoIP Group <[email protected]> >>> Subject: [cisco-voip] PSA: Hunt Groups and Alerting Names >>> >>> >>> >>> I was configuring some new stuff for a customer recently, and as I was >>> making test calls, I noticed the 7800/8800 series phones were not showing >>> the Hunt Pilot Alerting Name like I'm used to. >>> >>> >>> >>> I found a defect (CSCvn39109) which basically says that CUCM 11.5(1)SU5+ >>> was updated to change the way it presents the Hunt Pilot name to the phone, >>> and the phone firmware has not been updated to parse it. >>> >>> >>> >>> I implemented a SIP Normalization script on the SIP Profile applied to the >>> phones, which rolls back the format to pre- CUCM 11.5(1)SU5. >>> >>> >>> >>> That Lua script looks like this: >>> >>> >>> >>> M = {} >>> >>> >>> >>> local function hunt_uri_rollback(msg) >>> >>> >>> >>> local old_call_info = msg:getHeader("Call-Info") >>> >>> local new_call_info = string.gsub(old_call_info, >>> "huntpiloturi=\"%%22(.*)%%22(.*)\";", "huntpiloturi=\"%1\"%2;") >>> >>> msg:modifyHeader("Call-Info", new_call_info) >>> >>> >>> >>> end >>> >>> >>> >>> M.outbound_INVITE = hunt_uri_rollback >>> >>> M.outbound_UPDATE = hunt_uri_rollback >>> >>> >>> >>> return M >>> >>> >>> >>> Again, you apply it to a SIP Profile, which you then apply to the phone. >>> Then restart the phone. >>> >>> >>> >>> The Pre-Lua script Call-Info header looks like this: >>> >>> >>> >>> Call-Info: <urn:x-cisco-remotecc:callinfo>; security= Unknown; orientation= >>> from; gci= 4-166949; huntpiloturi="%22Your Hunt Pilot >>> Name%22<sip:\[email protected]>"; isVoip; call-instance= 1 >>> >>> >>> >>> The Post-Lua script Call-Info header looks like this: >>> >>> >>> >>> Call-Info: <urn:x-cisco-remotecc:callinfo>; security= Unknown; orientation= >>> from; gci= 4-166949; huntpiloturi="Your Hunt Pilot >>> Name"<sip:\[email protected]>; isVoip; call-instance= 1 >>> >>> >>> >>> Seeing the alerting name on the phone is a really useful feature in my >>> opinion, and so I hope this helps you out until Cisco fixes this with a >>> software patch. >>> >>> >>> >>> PS Make sure you have the CM Advanced Service Parameter set to True >>> (default): Display Hunt Pilot Name or DN for Hunt Group Calls When Alerting. >>> >>> _______________________________________________ >>> cisco-voip mailing list >>> [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
