I know I have done one MRA with IPs, back when MRA was new. You still need the Cisco Uds srv record to be there and that record needs to be resolvable my the C.
That old system isn’t using MRA right now, so I don’t know if it’s changed in newer versions of expressway. Sent from my iPhone > On Apr 1, 2020, at 8:13 PM, Dana Tong <dana.t...@yellit.com.au> wrote: > > > Hi all, > > I have a customer who was installed some 9 years ago and the hosts were all > configured with IP address instead of FQDN. They’re up on UCM 10.5(2) now and > I have spun up Expressway X12.5.7. > The UC Traversal zone is up and running. The Expressway’s have certificates > installed. > However I am hitting issues with getting the edge config and signing in. I > get the usual “cannot communicate with server” when I try to login with > Jabber. > > I’ve tried changing some things such as configuring the UCM, IM&P, Unity > servers in Expressway-C by IP or FQDN and have had some varying results on > the Collaboration Solution Analyser. Sometimes its downloads the user UDS > configuration and sometimes it doesn’t. > > Is MRA do-able with the UCM using IP address? Or am I going to have to bite > the bullet and reconfigure all the devices to use FQDN for their clustering? > Or is there some kind of easy fix? > > Cheers > Dana > > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
