Here are couple useful links explaining basic Pix firewall config.
http://www.cisco.com/warp/customer/110/20.html
http://www.cisco.com/warp/public/110/23.html
[EMAIL PROTECTED] ("Harrell, ET3") wrote in
<0D50C6BE69D0D311979100508B63A8861933AA@DESERT005>:
>I'm trying to set up a Cisco PIX Firewall for my network and I'm having
>trouble with the global command for the outside interface. I'm not
>totally understanding exactly which ip address or which range of ip
>addresses i'm supposed to enter into that. I do know that the global
>command statement has to correspond with the NAT id for the inside. Any
>help on this would be greatly appreciated. Thanx.
>Nathan Harrell
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>---
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
