On Mon, 15 May 2000, Circusnuts wrote:
> I have successfully upgraded 3X Cisco 3000's to run Enterprise IOS's. I'm not real
>up on the error I'm getting "after" the IOS is copied into FLASH...
>
> Verifying checksum... invalid (expected 0xB482, computed 0x8024)
>
> Any ideas... 11.3 & 12.0 both showed this error, but 11.2 did not.
>
> Here is the show version...
>
> 1 Ethernet/IEEE 802.3 interface(s)
> 1 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
How large are the images you're trying to write to the 8192K of flash
you have on board?
I think you need 16M of flash for 11.3 and later Enterprise.
--
Jay Hennigan - Network Administration - [EMAIL PROTECTED]
NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
WestNet: Connecting you to the planet. 805 884-6323
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
