I have a 64k point to point ckt running from point A to Point B with Adtran
tsu on each end connected to the telco's dmarc with a straight through
cable. I have alarm lights on both tsu's. both are properly configured as
our other tsu's are. here is the puzzling part the telco says they can test
good to THEIR dmarc at both points A and B but cannot see our tsu's on
either side. I have tested both of the straight through cables that go from
the telco dmarc to the tsu and both are good.
any suggestions would be greatly appreciated!
thanks,
JD
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
