tty is for access server/reverse telnet.
If you have vty port, you add the number to setup all the line at the same
time.
If you don't have vty port, you put in a 0.
Albert
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
cisco cabanaboy
Sent: Monday, June 12, 2000 2:34 PM
To: [EMAIL PROTECTED]
Subject: mysterious lines
What are all of these mysterious lines ? 0-134 ?
1 con + 1 aux + ???tty +5 vty =135 ?????
please enlighten me
btw when i entered in
exec-timeout 0 0
it seemed to affect all of the lines
******************************************************
C3640#conf t
Enter configuration commands, one per line. End with
CNTL/Z.
C3640(config)#line ?
<0-134> First Line number
aux Auxiliary line
console Primary terminal line
tty Terminal controller
vty Virtual terminal
C3640(config)#line 0 ?
<1-134> Last Line number
<cr>
C3640(config)#line 0 134 ?
<cr>
C3640(config)#line 0 134
No physical hardware support for line 1
C3640(config-lin)#
=====
ciscocabanaboy, CCNP-Voice, CCDP, MCSE, CNX, A+, N+, I-net+, BOFH...
__________________________________________________
Do You Yahoo!?
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
