Would you also need port 135 for RPC? I'm not sure, but everything with NT
seems to be RPC-based.
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Thursday, June 29, 2000 1:30 PM
Subject: RE: Microsoft Networking over WAN
> TCP 137
> UDP 138
> TCP 139 would be required for ms networking
>
> you may also need ip helper-address and ip forward protocol udp if you are
> doing DHCP across the wan.
>
> Cheers,Padhu
>
> -----Original Message-----
> From: Michael Linehan [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, June 29, 2000 1:18 PM
> To: CiscoStudyGroup
> Subject: Microsoft Networking over WAN
>
>
> Could someone please give me the required ports that need to be open so
> I can map drives, and login to a NT Server? Also is there anything else
> I should know about doing Microsoft Networking over a Cisco Router WAN
> connection?
>
> Thanks.
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
