hi Chee Tong,
By default, your cat29xx comes with one vlan(vlan1). For example, if you
want to place your fastethernet0/13 on vlan2, you do this:
conf t
int fastEthernet 0/13
switchport access vlan 2
Hope it'll help you.
********************************************
Luan T. Kim, MCSE, CCNA *
Systems/Network Infrastructure Engineer *
MP3.COM, INC. http://www.mp3.com *
Phone: 858-623-7341 Cell: 858-382-3055 *
Fax: 858-623-7400 Email: [EMAIL PROTECTED] *
********************************************
On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote:
> Dear Friends,
>
> What is the procedure to configure VLan on 2900 switches, wat command to
> use? If we don't configured VLAN on 2900 switches, will it cause the
> slowness in the network
>
> Chee Tong
>
>
>
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
