Below is the way to configure a 2900 Series Switch that is running the
Enterprise IOS
subset for the switch.....If there are anything that I've left out with this
please reply to
this.....Thanks.....
lab-switch#vlan database
lab-switch(vlan)#vtp domain < vlan1 > = whatever you want to name you vlan
domain
lab-switch(vlan)#vtp password < XXX > vtp password
lab-switch(vlan)#vtp server
^^^^^^^ = only on the first switch all other switches need to be ' vtp
client '
lab-switch#show vtp status
These commands are totally separate from the Trunk Ports.....These commands
are for the
individual ports itself that belong to the Vlans.....Whereas the Trunk port
are the port that
uplink with the Router.....
lab-switch(config)#interface fastethernet x/x
lab-switch(config-if)#switchport access vlan X = whatever Vlan you want this
to have access too
There can only be one of the following below on an interface.....Only one
Encapsulation per Port.....
These commands are separate from the < switchport access vlan X
>.....Whereas these uplink to the
Router for the Vlan trunk connection.....
lab-switch(config-if)#switchport trunk encapsulation dot1q = for IEEE
802.1Q Encapsulation
lab-switch(config-if)#switchport trunk encapsulation isl = for
Cisco proprietary ISL Encapsulation
lab-switch(config-if)#switchport mode trunk
-JEK-
Senior Network/Systems Engineer
CCNA
"Sim, CT (Chee Tong)" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear Friends,
>
> What is the procedure to configure VLan on 2900 switches, wat command to
> use? If we don't configured VLAN on 2900 switches, will it cause the
> slowness in the network
>
> Chee Tong
>
>
>
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
