The recommended vlan encapsulation for Fast Ethernet is ISL. I've never
tried using 802.1Q encapsulation with Fast Ethernet interfaces but if it
woks then great. One thing though....the configuration you posted is Ok for
the most part but you need to configure a subinterface for VLAN 1 too so the
router can route between VLANs using 802.1Q encapsulation.
Parrish.
"lee" <[EMAIL PROTECTED]> wrote in message
8jt0p4$u0r$[EMAIL PROTECTED]">news:8jt0p4$u0r$[EMAIL PROTECTED]...
> Hi all, I have a Cat4003 & 3640, i'm trying to configure 802.1q
> encapsulation on both unit, and use 3640 as the vlan router. Finally, i
can
> make it working, but i hope someone can tell whether i have configure it
> rightly.
>
> my configuration for vlan routing for 1,2 & 3 on 3640 router is like :
>
> interface FastEthernet1/0
> ip address 203.92.128.1 255.255.255.224
> no ip directed-broadcast
> !
> interface FastEthernet1/0.2
> encapsulation dot1Q 2
> ip address 203.92.128.193 255.255.255.248
> no ip directed-broadcast
> !
> interface FastEthernet1/0.3
> encapsulation dot1Q 3
> ip address 203.92.128.130 255.255.255.192
> no ip directed-broadcast
>
>
> Hope someone can give me some idea on 802.1q vlan routing configuration.
>
> Thanks in advance.
>
> regards,
> lee
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
