802.1q works just fine with FastEther. Just keep in mind that some software
versions or supervisor engines (switches) can support EITHER ISL or dot1q
but not both. The Catalyst 4003's are a good example (dot1q only).

Karen E Young
Network Engineer
ELF Technologies, Inc
[EMAIL PROTECTED]
Desk:  425-369-5369
Fax:  425-391-1774
Pager:  206-994-4514



                                                                                       
                                  
                    "Parrish B.                                                        
                                  
                    Gamarra"                  To:     [EMAIL PROTECTED]             
                                  
                    <pgamarra@sprintpa        cc:                                      
                                  
                    ranet.com>                Subject:     Re: Vlan routing with 
802.1q                                  
                    Sent by:                                                           
                                  
                    nobody@groupstudy.                                                 
                                  
                    com                                                                
                                  
                                                                                       
                                  
                                                                                       
                                  
                    07/05/00 04:21 PM                                                  
                                  
                    Please respond to                                                  
                                  
                    "Parrish B.                                                        
                                  
                    Gamarra"                                                           
                                  
                                                                                       
                                  
                                                                                       
                                  



The recommended vlan encapsulation for Fast Ethernet is ISL. I've never
tried using 802.1Q encapsulation with Fast Ethernet interfaces but if it
woks then great. One thing though....the configuration you posted is Ok for
the most part but you need to configure a subinterface for VLAN 1 too so
the
router can route between VLANs using 802.1Q encapsulation.

Parrish.

"lee" <[EMAIL PROTECTED]> wrote in message
8jt0p4$u0r$[EMAIL PROTECTED]">news:8jt0p4$u0r$[EMAIL PROTECTED]...
> Hi all, I have a Cat4003 & 3640, i'm trying to configure 802.1q
> encapsulation on both unit, and use 3640 as the vlan router. Finally, i
can
> make it working, but i hope someone can tell whether i have configure it
> rightly.
>
> my configuration for vlan routing for 1,2 & 3 on 3640 router is like :
>
> interface FastEthernet1/0
>  ip address 203.92.128.1 255.255.255.224
>  no ip directed-broadcast
> !
> interface FastEthernet1/0.2
>  encapsulation dot1Q 2
>  ip address 203.92.128.193 255.255.255.248
>  no ip directed-broadcast
> !
> interface FastEthernet1/0.3
>  encapsulation dot1Q 3
>  ip address 203.92.128.130 255.255.255.192
>  no ip directed-broadcast
>
>
> Hope someone can give me some idea on 802.1q vlan routing configuration.
>
> Thanks in advance.
>
> regards,
> lee
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---


___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to