Send me a copy of your configs. Sounds like you have a
port / dest-pattern mapping mismatch. Are you able to
dial the local phones fine connected to router (if you
have 2 phones plugged into the ports)?
--- Antonius Kurniadi <[EMAIL PROTECTED]>
wrote:
> Hi Erick,
>
> I'm using 11.3(4)T software.
> The problem is when I tried to call extension at
> another side, it always
> busy.
> Do you have working config for this ?
>
> Thanks for help.
>
> Rgds-
> Anton
>
> Erick wrote:
>
> > Hi,
> >
> > What is the problem and do you have configs?
> >
> > You will need a vofr dial-peer and a pots
> dial-peer
> > setup, then on the frame DLCI you're using you'll
> need
> > to configure it with traffic shaping. Lastly, what
> ver
> > of IOS?
> >
> > --- Antonius Kurniadi <[EMAIL PROTECTED]>
> > wrote:
> > > Hi all,
> > >
> > > I have problem when configuring VoIP over Frame
> > > Relay.
> > > I have both 3640 Routers with 2 slot VoIP
> modules.
> > > Any body has working configuration about VoIP
> over
> > > Frame Relay ..?
> > >
> > > Thanks for help.
> > >
> > > Antonius Kurniadi
__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
