I dunno...I've plugged into the console port using Win95 hyperterm and just
hit the escape key. It stopped booting and I went on my merry way.
-----Original Message-----
From: Aaron Prather [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 07, 2000 1:40 PM
To: [EMAIL PROTECTED]
Subject: PIX bootup break key??
Hi all,
I am trying to put in a new 56bit encryption activation key, and i am
having problems, CCO does not have good documentation on what to do here,
They do say the following:
"Upgrading the Activation Key
----------------------------------------------------------------------------
----
Note The activation key can only be entered after downloading a new
image---not from the command line or without first rebooting."
they also say this:
"Step 4 Press Escape or send the BREAK character to enter the boot ROM
monitor. You can send a BREAK on a Windows system with ctrl-break or by
pressing the Esc key."
i have tried ctrl-break, i have tried "esc" i have tried ctrl-shift-6
im using hyperterminal and i have tried both win95 and win2k
please help,
Thanks,
Aaron
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
