I agree, it sounds like you need to assigned "IP HELPER ADDRESSes" This will
point to the DHCP server and opens up UDP ports 137 and 138.
------Original Message------
From: "Don Orlik" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: July 7, 2000 8:16:02 PM GMT
Subject: Re: interesting part 2
Most likely if there is different networks, you may need to use a IP helper
address. Take a look at that command because I feel that could be your
problem.
""Atif Awan"" <[EMAIL PROTECTED]> wrote in message
010701bfe84f$83c74bc0$050100c0@Tech">news:010701bfe84f$83c74bc0$050100c0@Tech...
well the scenario is the same .. 3 routers connected in a hub and spoke
topology with the 2620 ( IOS 12.1(1)) as the hub. This time the DHCP is not
working across the WAN. it used to work fine before the 2620 came in .. are
there any IOS 12.1(1) bugs or something like that which will prevent it from
functioning properly.
i am also looking it up on the cisco web site but if anyone knows the
solution first do post it :)
Regards
Atif
Jorge Rodriguez /CCNA
Network Analyst
R&S Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Evenings
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
........................................................
iWon.com http://www.iwon.com why wouldn't you?
........................................................
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
