We had similar problems with spoke/hub setup going from 2524's to
2610's. We had to add 5 additional lines into our config to get the
2610 to communicate. You might try a combination of these. We use
EIGRP and a 10 network.
ip classless
ip routing
router eigrp 1
network 10.0.0.0
no auto-summary
David Toalson
816-701-4142
> ----------
> From: Atif Awan[SMTP:[EMAIL PROTECTED]]
> Reply To: Atif Awan
> Sent: Friday, July 07, 2000 3:11 PM
> To: [EMAIL PROTECTED]
> Subject: interesting part 2
>
> well the scenario is the same .. 3 routers connected in a hub and
> spoke topology with the 2620 ( IOS 12.1(1)) as the hub. This time the
> DHCP is not working across the WAN. it used to work fine before the
> 2620 came in .. are there any IOS 12.1(1) bugs or something like that
> which will prevent it from functioning properly.
> �
> i am also looking it up on the cisco web site but if anyone knows the
> solution first do post it :)
> �
> Regards
> Atif
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
