Do you use any routing protocol between A, B, & C??
Most of the routing protocols can be set up to load balance across multiple
different routs to the same network if the metrics are the same. E/IGRP can
load balance even if the metrics are not the same.
Note - A is probably set for fast-switching to B & C since it is on a LAN
interface. When you are fast-switching the router will only load balance on
a per-destination basis. If you want it to load balance on a per-packet
basis you have to turn off fast switching by turning off route cacheing.
Hope that helps,
Mike
>
>
>
>I have three routers connected via token ring, A, B, & C.
>
>Routers B & C both have serial links to the same location.
>
>Can I configure router A to balance the traffic between routers R & C.
>
>Currently using static routes in A to send traffic to B only.
>
>Thanks!
>
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
